MID1113: Assignment 2
Assignment 2: 2 Point Perspective drawing
You are to apply the knowledge and skills learn in this class. This project is to emphasize on the quality of line, perspective trajectory and cleanliness of work.
1. Choose 2 place that can show the 2 point perspective view;
-1 interior
-1 exterior
2. Take a picture and print it in A4 size (colour or black and white)
3. The drawings have to cover almost entire A3 paper.
4. Black pen in drawing line usage is a must. Only construction line can be made by pencils.
5. Paste the drawing on A2 size of mounting board.
6. Clip the original pictures on top of the board.
7. At the back of board, paste :
________________________________________________
Name:
Id :
Subject: Design Process for Interface Design
Subject Code : MID 1113
Assignment: 2 Point Perspective (Interior/exterior)
Title:
Date Submit: 14 July 2009
________________________________________________
8. Submission : Tuesday,14 July 2009,9.00am
Sir, I have taken the photos for this assignment but would like to get your feedback on which are suitable:
http://matahatidesigns.com/mystudyblog/?p=5
-i would say exterior 2
-for interior,can you take picture of the whole room,not just the sofa set… like our previous exercise…
thank you
Thanks. I’ll take another photos for interior.
Sir, yang ni ok tak for interior: http://matahatidesigns.com/mystudyblog/?p=12
And which one would you suggest me to draw?
aiyah… what i mean is.. you only need to step back few steps and snap again… so that you can capture the whole room… at least got the ceiling and wall.. like this one
you second set of picture are not that suitable to portray 2 point perspective…
Aha…but that would be vertical? I thought we need to draw in horizontal?
the paper has to be horizontal, if the picture is in vertical,then your drawing should be like this;
I see. I get the picture. I’ll take another shot.
Sir, mcm ni betul tak?
http://matahatidesigns.com/mystudyblog/?p=16
wokeh… just lukis sampai kapet yang ada meja tuh suda…
Oraitt..thanks sir 🙂